SIGNAL SDS-Series Controller (SDS-50 / SDS 100)
Designed and manufactured in Australia.
The SDS-Series irrigation controllers are built for reliability, efficiency, and workmanship.
The SDS-50 is the first model in a new range of high performance economically priced Two-Wire controllers.
The SDS-100 is the top model in a new range of high performance, economically priced Two-Wire irrigation controllers.
Powerful with intuitive programming, the SDS-Series controllers are flexible systems suitable for the complex requirements of both commercial landscape and agricultural applications.
Every SDS-Series controller is supplied complete with power supply, lightning protection module and PumpNode.
The economically priced SDS-Series controllers are uncompromising on quality and offers a capability not found on competing products many times their price.
SDS-50 Product Specifications
- 48 Station, 48 DataValve™ (or DataCoil™) capacity.
- Operates up to four valves at once, inclusive of a master valve.
- No separate decoders – Decoders have been miniaturised and embedded within the coil (DataCoil™).
- Optional RelayCube™ multi-wire converter.
- 8 Independent programs.
- 12 Programmable field DataNodes™ connect directly to the two-wire cable.
- Moisture sensors (up to 8).
- Water meters (up to 8).
- Frost sensors (2 zones).
- 7 Direct controller sensor inputs connect to the controller terminal strip.
- Two-way communication every 3 seconds between all field devices and the controller.
- Program watering settings in Time, Volume (litres) and Precipitation (mm).
- 14 day calendar, 4 start times per program.
- Loop program for propagation.
- Run times in Hr : Min : Secs.
- Exclusive HydroSector™ program for matched precipitation zones.
- DataValves™ can be assigned to any station by keypad entry, SignalCloud.com software or SDS-LINK SmartPhone/Tablet Apps.
- DataNodes™ can be assigned to any program.
- PumpNodes connect to the two-wire cable to activate pump-start relays.
- Auxiliary pump for chemical/fertigation program.
- Individual pumps can be assigned for each program.
- Option to assign a secondary boost pump to selected stations.
- 2 independent Frost programs.
- Water flow and system electrical current draw displayed.
- Flow deviation with email alerts. Skips to next station, then shuts down program after third skip if the alert stays active.
- Various programmable delays in programs to compensate for hydraulic anomalies. For example; slow closing valves, ramp-down of pumps and low or high pressure spikes.
- Easy DIY repairs due to modular design of SDS plug-in boards.
- Simple connectivity over SignalCloud. Control your irrigation over WiFi, 3G, 4G or Radio.
- Supported by SignalCloud Web-Based Irrigation Central Control Software.
- Free SDS-LINK Mobile App, available for download from the Apple App Store and Google Play.
SDS-100 Product Specifications
- 96 Station, 96 DataValve™ (or DataCoil™) capacity.
- Operates up to eight valves at once, inclusive of a master valve.
- No separate decoders – Decoders have been miniaturised and embedded within the coil (DataCoil™).
- Optional RelayCube™ multi-wire converter.
- 8 Independent programs.
- 12 Programmable field DataNodes™ connect directly to the two-wire cable.
- Moisture sensors (up to 8).
- Water meters (up to 8).
- Frost sensors (2 zones).
- 7 Direct controller sensor inputs connect to the controller terminal strip.
- Two-way communication every 3 seconds between all field devices and the controller.
- Program watering settings in Time, Volume (litres) and Precipitation (mm).
- 14 day calendar, 4 start times per program.
- Loop program for propagation.
- Run times in Hr : Min : Secs.
- Exclusive HydroSector™ program for matched precipitation zones.
- DataValves™ can be assigned to any station by keypad entry, SignalCloud.com software or SDS-LINK SmartPhone/Tablet Apps.
- DataNodes™ can be assigned to any program.
- PumpNodes connect to the two-wire cable to activate pump-start relays.
- Auxiliary pump for chemical/fertigation program.
- Individual pumps can be assigned for each program.
Option to assign a secondary boost pump to selected stations. - 2 independent Frost programs.
- Water flow and system electrical current draw displayed.
- Flow deviation with email alerts. Skips to next station, then shuts down program after third skip if the alert stays active.
- Various programmable delays in programs to compensate for hydraulic anomalies. For example; slow closing valves, ramp-down of pumps and low or high pressure spikes.
- Easy DIY repairs due to modular design of SDS plug-in boards.
- Simple connectivity over SignalCloud. Control your irrigation over WiFi, 3G, 4G or Radio.
- Supported by SignalCloud Web-Based Irrigation Central Control Software.
- Free SDS-LINK Mobile App, available for download from the Apple App Store and Google Play.
